Soma Networks SOMAport Setup Manual Download Page 72

Page: 72 / 80

SOMAport Setup Guide

To obtain a new IP address (Windows 95 only)

Choose Start

→

Run

Enter

winipcfg

in the

Open

field and click

The IP Configuration window opens.

Select the network interface that has a default gateway of 192.168.1.1 from the
pull-down list.

Click

Release All

Force your computer to obtain a new IP address by clicking

Renew All

Wait until the fields in the IP Configuration window have values in them or an error
message appears. If you close this program before it has completed its task you
will have to reboot your computer before you can use your Internet service.

Close the IP Configuration window.

To obtain a new IP address (all other versions of Windows)

Open the MS-DOS Prompt window using one of the following methods:

In Windows 2000, choose Start

→

Run

→

Accessories

→

Command Prompt.

In all other versions of Windows, choose Start

→

Programs

→

MS-DOS Prompt.

The MS-DOS Prompt or Command Prompt window opens.

Force your computer to obtain a new IP address by typing the appropriate
command from the following table:

The Windows IP configuration is displayed.

IF you have

THEN type

Windows 98 or ME

ipconfig /renew_all

↵

↵↵

↵

Windows 2000 or XP

ipconfig /renew

↵

↵↵

↵

Summary of Contents for SOMAport

















































































Search results

Summary of Contents for SOMAport

Reviews:

Related manuals for SOMAport

Brands by name

Popular brands

Soma Networks SOMAport, Setup Manual

Search results

Summary of Contents for SOMAport

Reviews:

Related manuals for SOMAport

Brands by name

Popular brands