background image

44

SOMAport Setup Guide

Changing network settings in Windows 98 and ME

Change your computer’s network settings if you could not get an Internet 
connection after connecting your computer to the SOMAport. 

The procedure you follow depends on whether or not your PC has previously 
been set up for a dial-up Internet connection. Choose one of the following 
procedures: 

„

If the PC has not previously been set up for a dial-up connection, you can 
use the Internet Connection Wizard. See 

“To run the Internet Connection 

Wizard in Windows 98 and ME”

 below.

„

If the PC has been previously set up for a dial-up connection, the Internet 
Connection Wizard will not work and you must manually change the 
network settings. See 

“To change network settings in Windows 98 and ME” 

on page 45

.

To run the Internet Connection Wizard in Windows 98 and ME 

1

Start the Internet Connection Wizard:

„

In Windows 98, the wizard is in one of the following locations, depending on 
the version of Windows 98:

„

Start

Programs

Accessories

Internet Explorer

Connection Wizard

„

Start

Programs

Accessories

Internet Tools

Internet Connection 

Wizard

„

Start

Programs

Accessories

Communications

Internet Connection 

Wizard

„

In Windows ME, choose Start

Programs

Accessories

 

Communications

Internet Connection Wizard.

The Welcome to the Internet Connection Wizard window opens.

2

Enable the 

I want to set up my Internet connection manually, or I want to 

connect through a local area network (LAN) 

radio button and click 

Next

.

The Setting up Your Internet Connection window opens.

3

Choose

 I connect through a local area network (LAN) 

radio button and click 

Next

.

The Local area network Internet Configuration window opens.

Summary of Contents for SOMAport

















































































Reviews: