manualshive.com logo in svg

Soma Networks SOMAport R3.0, Setup Manual

Share
Download
Soma Networks SOMAport R3.0 Setup Manual Download Page 6

6

Attachments

 — Do not use attachments with the SOMAport that have 

not been recommended in this guide as they may cause hazards.

Water and moisture

 — Do not use the SOMAport near water or 

moisture. 

Maintenance and Servicing

Cleaning

 — Unplug the SOMAport from the wall outlet before 

cleaning. Do not use liquid or aerosol cleansers. Use a dry cloth to wipe 
the outside of the unit. 

Servicing

 — Do not attempt to service the SOMAport yourself as 

opening or removing covers may expose you to dangerous voltage or 
other hazards and may void the warranty. There are no user-serviceable 
parts inside. Refer all servicing to qualified service personnel. 

Conditions requiring service

 — Unplug the SOMAport from the wall 

outlet and refer servicing to qualified service personnel under the 
following conditions:

„

The power supply or cord is damaged.

„

Liquid has been spilled on the SOMAport or it has been exposed 
to water.

„

An object has fallen into the SOMAport.

„

The SOMAport does not function normally even though you have 
adhered to the operating instructions and have made adjustments 
to only those controls covered by the operating instructions. 

„

The SOMAport exhibits a distinct change in performance.

Alerts Used in This Guide 

WARNING: 

Where you see this symbol and the WARNING heading,

strictly follow the instructions to avoid personal injury or damage to the
product.

sp3.book  Page 6  Thursday, July 22, 2004  3:21 PM

Summary of Contents for SOMAport R3.0



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands