manualshive.com logo in svg

Soma Networks SOMAport R3.0, Setup Manual

Share
Download
Soma Networks SOMAport R3.0 Setup Manual Download Page 5

5

I

MPORTANT

 S

AFETY

 I

NSTRUCTIONS

Installation

Read instructions

 — Read and follow all of the safety and operating 

instructions before operating the SOMAport. 

Retain instructions 

— Retain the safety and operating instructions for 

future reference.

Heed warnings

 — Adhere to all warnings on the SOMAport and in the 

operating instructions.

Ventilation

 — Slots and openings in the SOMAport housing provide 

ventilation, ensure its reliable operation, and protect it from 
overheating. Do not block or cover these openings. Do not place the 
SOMAport in a built-in installation such as a bookcase or rack unless 
there is proper ventilation or the installation instructions have been 
adhered to.

Power sources

 — Use only the type of power source indicated on the 

label. If you are not sure of the type of power supplied to your home, 
consult your product dealer or local power company. 

Grounding and polarization

 — The plug for the power cord on the 

SOMAport fits into the power outlet only one way. If you are unable to 
insert the plug fully into the outlet, contact your electrician to replace 
your outlet. To prevent electric shock, do not use this plug with an 
extension cord or outlet unless you can fully insert the blades without 
blade exposure. Do not defeat the safety purpose of this plug.

Power-cord protection

 — Route power-supply cords so that they are 

not likely to be walked on or pinched by items placed upon or against 
them. Watch for wear in the cord at the plug and socket. 

Accessories

 — To avoid personal injury or damage to the SOMAport, 

do not place it on an unstable cart, stand, tripod, bracket, or table. 

sp3.book  Page 5  Thursday, July 22, 2004  3:21 PM

Summary of Contents for SOMAport R3.0



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands