22
11.
Lighting
* Fully open the chimney registry;
* Open the lower door and the front grille;
* Lay a few pine cones (preferred) or fire fighters on the ash grate (Figure 15);
* Put small wood;
* The firing period is completed when the unit chassis reaches a stable temperature
- the air admission setting is automatically controlled by the combustion regulator;
* The combustion air is retrieved from the room where the unit is installed, therefore
consuming oxygen from the room. You should ensure that any ventilation grids or
other fresh air intake mechanisms remain unobstructed at all times.
Figure 15 – Lighting
12.
Maintenance and Cleaning
To access the interior of the combustion chamber it is necessary to open the lower
and upper doors (Figure 16-a and Figure 16-b). The main concern with this appliance
is to periodically clean the ashes that accumulate inside the unit and fume duct, they
can be collected in the lower area of the boiler through a drawer (Figure 16-c and
Figure 16-d).
For the fume duct it is necessary to remove the front register and the grate from the
bottom of the combustion chamber, then scrape the ash from the inside with the
poker (Figure 16-e, Figure 16-f and Figure 16-g) the ash must be collected in the
lower area of the boiler with the aid of the drawer.
