User Manual
Page 9
of 35
Pairing the Device
Your HomePlug AV2 devices by default are preconfigured to have a common
Private Network Name. Setting up your HomePlug AV2 network is as easy as 1,2 and
3.
1.
It is advisable that you plug in your HomePlug AV2 devices side by side to easily
observe the LED behaviors of each HomePlug AV2. Wait until the Power and PL-
ACT LED turns ON to confirm that the connection has been established
2.
In ROOM A plug in your HomePlug AV2 into the wall socket then connect it to
your modem router’s Ethernet port using an Ethernet cable.
3.
In ROOM B plug in your HomePlug AV2 into the wall socket then connect it to
your computer’s Ethernet Port using an Ethernet cable. Your HomePlug AV2 is
now ready to use.
