User Manual
Page 13
of 35
Joining an Existing Secured HomePlug AV2
Network
To enable a new device to join an existing network, Simple Connect will copy the
Private Network Name of the existing network to the new HomePlug AV2. You only
have to pair the new HomePlug AV2 device to any of the devices within the existing
HomePlug AV2 Network by pressing the Simple connect. If you pressed Simple
Connect from multiple HomePlug AV2s, only the signal from the first two devices will
be processed.
To join an existing Secured HomePlug AV2 network using Simple
Connect:
Step 1
Plug HomePlug X (your new HomePlug) beside one of your existing HomePlug
AV/AV2 devices. It is important to ensure that you can easily observe the LED
behaviors of the HomePlugs in your home.
Upon connection, HomePlug X’s LEDs will blink simultaneously and then the Power
LED lights ON steadily. Ethernet LED will be ON if there are Ethernet devices
connected to its Ethernet ports.
Step 2
Press Simple Connect for 10 seconds from HomePlug X. After you release the button,
The Power LED and Ethernet LED would blink.
Note: If the Power and Ethernet LED did not blink, press Simple Connect again for 10
seconds.
Step 3
Press Simple Connect Button for two seconds on HomePlug Y (existing HomePlug).
After you release the button, the Power LED will continuously blink. If the Power
LED did not blink, press Simple Connect again for two seconds.
