User Manual
Page 14
of 35
Step 4
Press Simple Connect Button again on the HomePlug X within two minutes after you
press Simple Connect from the existing network.
Step 5
To confirm if the connection was established, check the LEDs. The Power LEDs and
the Powerline Activity LEDs on all HomePlugs are on.
Note
: If the Powerline Activity LED on HomePlug X is off, this means the pairing was
unsuccessful. You have to repeat steps 1 to 4 again until all LEDS in all HomePlug
AV/AV2 devices are ON.
Step 6
Unplug HomePlug Z and then connect it to your Ethernet device using the Ethernet
cables from the product package. After connecting the Ethernet cable, plug
HomePlug Z directly to a wall outlet. An Ethernet-enabled device can be a router,
computer, hub, gaming console, IP phone, network printer, or IP TV set-top box.
Note: HomePlug AV2s work best when connected directly to a wall socket. It is
suggested to avoid plugging a HomePlug AV2 to a power strip or power extension
as much as possible. Other electrical devices in the power strip produce electrical
noise that may affect the overall performance of the HomePlug.
