Electrical connection
SolBatt Home_User Manuel_B.00-EN
11/24
7.1
De-installation
To de-install the SolBatt Home:
Disconnect the communication wires.
Disconnect any optional connections.
Disconnect the DC power wires.
Disconnect the battery wires.
Now the SolBatt Home can be removed for disposal or repair.
7.2
Disposal
When SolBatt Home reached the end of its service life, or is defect beyond repair:
Dispose of the SolBatt Home according to local regulations.
Submit the SolBatt Home to a collection point for electrical and electronic waste recycling.
8
Electrical connection
The electrical connection can be carried out once the SolBatt Home is solidly mounted.
8.1
Additional PE connector
Warning!
De-installation must be carried out by qualified personnel. Contact your installer/dealer.
48V Li-ion batteries are indicated as dangerous goods and may require special
transportation. Please Check the documentation of the supplier and local regulations.
Attention!
Please use the PE screw on the underside of the housing (Chapter 5) for additional fixed
protective earth connection. Use a yellow-green cable with a minimum gauge of 4 mm
2
, 10
mm² is recommended. Connect the other end of the PE cable to the equalisation panel for
the building.
