background image

 

 

 

8

 / 

52

 

 

1.2.1 Transportation and installation 

1.2.2 Grid-tied operation

 

Note 

• Only qualified electricians are allowed to operate the machine under 

the permission of local power departments. 

• All electrical connections must meet the electrical standards of the 

countries/regions in which the project is located. 

• Ensure reliable installation and electrical connection before operation. 
• Do not open the cover of the machine when the machine is working or 

any circuit is connecting to the machine. 

 

 

 

 

 

 

• Keep the package and unit complete, dry and clean during storage 

and transportation. 

• This machine is heavy. Please remove and install it with at least 
  Two people. 
• To ensure the normal and safe operation of the energy storage 

integrated machine and avoid personal injury, please select proper 

handling and installation tools, and take mechanical protection 

measures to protect personal safety, such as wearing smashing 

shoes, coverall and so on. 

• Only qualified electricians are allowed to install the machine. 
• Do not put and install the machine on or close to flammable or 

explosive materials. 

• Do not install the machine in a place where children and other people 

can easily touch it. 

• To avoid a risk of electric shock, please remove rings, bracelets, and 

other metal jewelry on your hands before installation and electrical 

connection. 

• The solar cell modules exposed to the sunlight may generate 

dangerous voltage. Users must cover the cell modules with fully light 

shading materials before electrical connection. 

• The input voltage of the machine should not exceed the maximum 

input voltage, otherwise damage may occur. 

• The machine is not suitable for the positive or negative grounding 

systems of solar cell modules. 

• Ensure the proper grounding of the inverter. 
• Ensure reliable installation and electrical connection.

 

Summary of Contents for S4 EU-A36





















































Reviews: