Cleaning and maintenance
05/2014
1015306-00
Operating instructions – 47/74
–
Remove the two upper low pressure lamps in the canopy so that you can
then access the facial tanner's low pressure lamp starter.
Replacing lamps:
UV low pressure lamps: see page 42.
UV high pressure lamps and filter panels: see page 43.
Replacing starters: see page 43.
Changing the chip card: see page 41.
The assembly is the same process in reverse order.
When assembling the device please note:
–
Support the canopy panel with one hand so that it does not fall down.
–
Refit and retighten the screws. Refit the middle screw first and then the
outer screws.
5.12
Cleaning or replacing the UV lamps
and filter panels in the shoulder
tanner
–
Remove the screws and then remove the tanning tunnel.
–
Remove one screw from each one.
–
Remove both housings and carefully lay them aside.
Changing the UV high pressure lamps: see page 43.
2
1
4
3
15020 / 0
!
!
2
1
15975 / 0
15977 / 0
