Cleaning and maintenance
34/74
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the warm-down
time for the main fan has finished).
5.5
Maintenance
Maintenance and care play a major role in deciding whether the device meets
the requirements placed on it in a satisfactory manner. Compliance with the
specified maintenance intervals and the careful conducting of the mainte-
nance and care work are therefore absolutely necessary.
The current operating hours of maintenance parts can be called up in service
mode (see 'Voreinstellungen/Presettings', order no. 1011777-..).
We point out that the device must be subjected to regular inspections by our
customer service or an approved specialized company every 12 months (from
commissioning) to maintain its proper condition!
Inspections and maintenance work that has been carried out must be entered
in the equipment, operating and maintenance booklet (order no. 1010363-..).
5.5.1
Acrylic glass
WARNING!
Cosmetics may cause cracks to form on the surface!
Over the long-term cosmetics or sunscreens cause damage
(e.g. crack formation on the surface).
–
Ensure that cosmetics and sunscreens are removed
before tanning.
Over the course of time the acrylic glass panel becomes more translucent as
a result of usage and must be replaced by customer-service personnel on a
regular basis.
The optional partition (only for devices with air conditioning) functions as a UV
filter and must be replaced by customer-service personnel on a regular basis.
5.6
Maintenance plan
WARNING!
Only use
genuine spare parts
of the same type! If other
parts are used then the device no longer complies with the
conformity declaration and may not be operated any longer!
Any liability for damage or injury proven to be the result of
the use of non-genuine spare parts is excluded.
