Cleaning and maintenance
11/2014
1015420-00
Operating instructions – 37/78
In addition to the maintenance plan on page 36, the following items should be
checked to ensure safe operation and use of your tanning system.
Component
Interval
1)
Activity
250 h / 3 months
500 h / 6 months
2500 h / 1 year
5000 h / 5 years
10000 h / 10 years
1 Springs
X
Inspect and replace as necessary
Springs
X
Replace
2 Bolts and fasteners of the canopy
hinge mechanism
X
Inspect and replace as necessary
Bolts and fasteners of the canopy lift
mechanism
X
Inspect and replace as necessary
Bolts and fasteners of the canopy
hinge/lift mechanism
X
Replace
3 Bolts and fasteners of the base/tank
hinge/lift mechanism
X
Inspect and replace as necessary
Bolts and fasteners of the base/tank
hinge/lift mechanism
X
Replace
4 Cylinders
X
Inspect and replace as necessary
Cylinders
X
Replace
5 Chassis and associated fasteners
X
Inspect and replace as necessary
Chassis and associated fasteners
X
Replace
6 Wiring and associated plugs / termi-
nal connections
X
Inspect and replace as necessary
7 Acrylic panels
2)
X
Inspect and replace as necessary
Acrylic panels
2)
X
Replace
8 Acrylic support(s)
X
Inspect and replace as necessary
Acrylic support(s)
X
Replace
9 High pressure filter glass
X
Inspect and replace as necessary
High pressure filter glass
X
Replace
10 High pressure lamp holder
X
Inspect and replace as necessary
High pressure lamp holder
X
Replace
1) Interval must be repeated after each inspection or replacement
(i.e. 1st: 3 months, 2nd: 6 months, 3rd: 9 months, etc.)
2) The schedule for acrylic replacement listed refers only to the condition of the acrylic
relating to safety and does not address the efficacy of UV transmission.
NOTE:
If the device is in service for longer than 10 years, it must be
completely overhauled by a trained service technician.
