Cleaning and maintenance
34/78
Component
Interval
Activity
See page
After each
tanning session
When necessary
50 h
1
Adjustable air nozzles
X
Cleaning and disinfection
32
2
Acrylic panel
X
Cleaning and disinfection
32
14
Operating panel
X
Cleaning and disinfection
32
Multifunction control panel
X
Cleaning and disinfection
32
Protective goggles
X
Cleaning and disinfection
32
MP3 cable
X
Cleaning and disinfection
32
6
Condensation tank
X
Empty
51
8
Body cooling air nozzles, foot end
X
Clean
32
9, 11, 16 Surfaces
X
Cleaning and disinfection
32
12
Nozzles AQUA / AROMA SYSTEM
X
Clean
32
13
Body cooling air nozzles
X
Clean
32
2-4
Filter
X Remove and clean filter
51
7
Filter
X Remove and clean filter
49
10
Filter
X Remove and clean filter
50
1
Filter
X Remove and clean filter
51
NOTE:
If desired, you may set the unit to require that cleaning be
confirmed after each tanning session by pressing the
START/STOP button (when the cool-down time for the main
fan has finished).
7.5
Maintenance
Maintenance and care play a major role in deciding the devices performance
and appearance over its useful life. Diligent compliance at the specified inter-
vals is absolutely necessary to ensure the proper operation of your tanning
system.
The current operating hours of the parts requiring maintenance can be dis-
played in the Professional Setup Manager – see separate instructions ' Pro-
fessional Setup Manager ' (order no. 1013630).
Please note that the device must be inspected regularly by a JK authorized
representative every 12 months (from date of installation) to maintain its
proper condition!
