04
05
03
Installation
WALL MOUNT
Connect
1. Attach the bracket on the
wall, then screw the solar panel
onto the bracket.
2. Screw the bracket onto the
fixture housing and mount it
onto the wall.
3. Connect the light and solar
panel cables.
Package Contents
1. Lamp (with bracket)
2. Solar Panel
3. Bracket for Solar Panel
4. Remote Control
5. Expansion pillar-hinge (4pcs)
6. Small Gasket (4 pcs)
7. Screw PA4*25 (4 pcs)
8. Large Gasket (2 pcs)
9. Screw M5*16 (2 pcs)
Additonal Notes
1. Prior to activation, allow for at least 48 hours of charging time
in bright sunlight for the battery to be sufficiently charged.
2. Install the solar panel where it will receive optimal sunlight without
any obstructions. If you are using this solar light in extreme
conditionsabove 131° Fahrenheit or below 32° Fahrenheit, the battery
an solar charging panel will functionless optimally as it gets colder.
3. When using the solar light in less than optimal conditions (cloudy,
or not much direct sunlight), it may take longer to fully charge
the battery.
OPERATING MODES
LIGHTING MODE INDICATOR
Red: M1
Green: M2
Orange: M3
T: Green Light Flashes
BATTERY CAPACITY INDICATOR
Green: >70%
Orange: 30%–70%
Red: 10%–30%
Note: The fixture is in low
voltage protection status when
the red light flashes.
Warning
1. Keep device away from fire and oil to avoid explosion.
2. Severe shock to Solar powered light is to be avoided.
3. Do not disassemble the light without assistance from an expert.
20W
50W
50% 5Hrs + 10% Till Dawn
30% 5Hrs + 10% Till Dawn
20% Till Dawn
M1
M2
M3
100% 2Hrs + 50% 5Hrs +
10% Till Dawn
+
100% 2Hrs + 30% 5Hrs +
10% Till Dawn
+
100% 2Hrs + 20%
Till Dawn
+
M1
M2
M3
T
T
T
50% 5Hrs + 10% Till Dawn
30% 5Hrs + 10% Till Dawn
20% Till Dawn
M1
M2
M3
100% 2Hrs + 50% 5Hrs +
10% Till Dawn
+
100% 2Hrs + 30% 5Hrs +
10% Till Dawn
+
100% 2Hrs + 20%
Till Dawn
+
M1
M2
M3
T
T
T
