Solt GGSUM52, User Manual, Page: 6 / 11

10 11
Changing the filter
• Remove the aluminium grease filter by pressing the lock catch
• Remove the saturated Activated Charcoal Filters (optional) shown below
• Fit the new Charcoal Filters shown below
• Refit the grease filter back into place
Replacing the lamp
Remove the aluminium grease filter by pressing the lock catch
Push the lamp from inside to remove the lamp.
Disconnect the wires to the lamp.
Connect the wires of the new lamp.
Push the new Lamp from outside and fix it to the hole.
11
Contents
Maintenance
Changing the filter



Remove the metal filter according to Installation (page 7).
Remove the saturated Activated Charcoal Filters(optional), as
indicated.
Fit the new Charcoal Filters, as indicated.
Replace the Metal grease Filter according to Installtion (page 8).

Operating Your Rangehood Cleaning and Maintenance (continued)
Light High Mid Low Stop
Cleaning the filter (recommended monthly)
• Remove the aluminium grease filter by pressing the lock catch
• Place it in your dishwasher with detergent at a temperature setting below 60°C
• Please do not use abrasive detergent as it will damage the rangehood
• Ensure that the rangehood is turned off before cleaning
Remove
Remove
On
On
Cleaning and Maintenance
7


Press the lock catch of metal
Filter, remove the Filter.
Remove the stainless steel
frame by unfastening the 4
screw (M4*10).
Unfastening the screws (ST4*10),
remove the lid of terminal box,
disconnect the wires to the
Commands at the connectors.
Disconnect the wires to the
Light at the connectors.



Fasten the Hood in the cabinet
by using the 12 screws (ST4*18).
Installation
7


Press the lock catch of metal
Filter, remove the Filter.
Remove the stainless steel
frame by unfastening the 4
screw (M4*10).
Unfastening the screws (ST4*10),
remove the lid of terminal box,
disconnect the wires to the
Commands at the connectors.
Disconnect the wires to the
Light at the connectors.



Fasten the Hood in the cabinet
by using the 12 screws (ST4*18).
Installation
Contents
Maintenance
Replacing the lamp
 Press the lock catch of metal
Filter, remove the Filter.

Push the lamp from inside,
to remove the Lamp.

Disconnect the wires to the
Lamp.
 Connect the wires of the
new Lamp.
 Push the new Lamp from outside
and fix it to the hole.
12
Contents
Maintenance
Replacing the lamp

Press the lock catch of metal
Filter, remove the Filter.

Push the lamp from inside,
to remove the Lamp.
 Disconnect the wires to the
Lamp.
 Connect the wires of the
new Lamp.
 Push the new Lamp from outside
and fix it to the hole.
12