2. COM3: WiFi/4G
VIII. Commissioning
1. Switch on AC circuit breaker between the inverter and the grid.
2. Switch on DC switch.
3. Please refer to the AiProfessional/Aiswei App manual for commissioning of the inverter via Wifi.
When there is sufficient DC power and the grid conditions are met, the inverter will start to
operate automatically.
IX. EU Declaration of Conformity
Within the scope of the EU directives:
- Electromagnetic compatibility 2014/30/EU
(L 96/79-106, March 29, 2014)(EMC)
- Low voltage directive 2014/35/EU (L 96/357-374, March 29, 2014)(LVD)
- Radio equipment directive 2014/53/EU (L 153/62-106, May 22, 2014)(RED)
AISWEI New Energy Technology (Jiangsu) Co., Ltd. confirms herewith that the inverters
mentioned in this document are in compliance with the fundamental requirements and
other relevant provisions of the above mentioned directives.
The entire EU Declaration of Conformity can be found at www.solplanet.net
5
Only applicable to the company’s products, can’t be connected to other USB devices.
NOTICE
i
▪ The connection refers to “4G/ WiFi-stick User Manual”.
Check that the inverter is grounded reliably.
Check that the ventilation condition surrounding the inverter is good.
NOTICE
▪ Check that the grid voltage at the point of connection of the inverter is within the permitted range.
Check that the sealing plugs in DC connectors and the communication cable gland are sealed
tightly.
Check that grid connection regulations and other parameter settings meet safety requirements.
EN
G
LIS
H
