UM0011_ASW 30-50K-LT-G2_EN_V03_1121
49
The light is on when the invert is faulty or when external
conditions cannot be grid-connected or when it is working
improperly. When there is no fault, the light is off.
9 Disconnecting the inverter from voltage sources
Before performing any work on the inverter, disconnect it from all
voltage sources as described in this section. Always adhere
strictly to the given sequence.
1. Disconnect AC circuit breaker and secure against
reconnection.
2. Disconnect the DC-switch and secure against reconnection.
3. Use a current probe to ensure that no current is present in the
DC cables.
