Update and Registration
Location Setup
i
Auto Track
When the Tag is turned on and
within range of the Base, the
Base will automatically track this
Tag.
This is the default setting.
i
Ask to Track
When the Tag is turned on and
within range of the Base, the
Tag will need to be toggled on
within the Tag Manager.
Tags that are toggled off will not
be tracked by the Base.
4
Finish setup by updating and
registering your Base, Tag(s) and
Camera to your SOLOSHOT
account, created in Step 1.
To ensure the best filming results:
•
Level your SOLOSHOT3 using the
bubble level on the Tripod.
•
Ensure that both the Base and
Tag always have a clear view of
the sky.
•
Do not bring the Tag and/or Base
inside once powered on.
•
Do not setup under an overhang,
dense tree canopy, or close to a
building or cliffs.
1
Setting up the SOLOSHOT Tripod
Open and set up the
Tripod
by unlocking the
Leg Locks
(a)
and extending the telescoping legs until the Tripod is
at the desired height. Lock the Leg Locks. In windy or
otherwise unstable conditions, be sure to widen the leg
stance using the
Wide Leg Locks (b)
.
Tripod Neck Extension:
Extend the Tripod Neck by loosening the
Neck Thumb
Screw (c)
. Tighten Neck Thumb Screw and Leg Locks
when desired height is achieved.
Wide Leg Lock Option:
Use a wider stance if necessary to improve stability or to
account for local topography. For example, in windy or
unstable conditions, or in areas where the Tripod may be
bumped or jostled, you should use a wider stance.
Windy Conditions:
Add a weight to the hook on the bottom of the Tripod
neck and/or widen the leg stance, as outlined above.
Continued from last page
a
c
b
IMPORTANT
USER MANUAL
05
SOLOSHOT.COM