manualshive.com logo in svg

Soloshot 3, User Manual, Page: 13 / 22

Share
Download
Soloshot 3 User Manual Download Page 13

NOTE

Moving the Base

Tracking Distance

1

Simply pick up the Base (and Tripod) and move it to a 
new location.

If tracking is on, picking up the Base will automatically 
pause tracking and recording. Once stable, the Base will 
re-calibrate and resume tracking and/or recording

If tracking is paused, the Base will re-calibrate once the 
user resumes tracking.

i

i

i

It is possible to reposition the Base at any time.

Maintain location setup best practices. 

See page 5, LOCATION SETUP

Maximum Distance 

Up to 2,000 feet away. If Tags fall out of range, the Base 
will become idle, or track the next available tag in multi- 
mode.

Minimum Distance 

The Base is optimized to track Tags at least 10 feet 
away. When tracking Tags inside a 10 feet radius, the 
Base may temporarily lose the subject.

2

i

Many tracking settings are 
available to suit your filming 
preferences. 

Tracking settings can be 
adjusted prior to calibration or 
any time during tracking/filming.

The default settings are: 

Camera Mode: 

Video

Resolution: 

1080p60 fps

Framing: 

Bottom Center

Field-of-View: 

Medium

Trajectory: 

3 Seconds

Advanced Track Settings

Tap TRACK SETTINGS

1

To adjust tracking settings 
Select the TRACK button.

Tracking and recording stop when 

accessing settings. 

NOTE

USER MANUAL 

13

 SOLOSHOT.COM

Summary of Contents for 3























Reviews:

No comments