Setting MTL Parameters
Motion Time-Lapse
i
i
1
Motion Time Lapse is the ability
to capture a series of photos at
while moving at predetermined
intervals.
Tap the settings panel to
configure how many photos
you’d like to take over a period of
time.
The
Interval
represents how
many seconds will elapse in
between each photo.
Interval Parameters:
3s, 5s, 10s, 30s, 60s
Tips:
Use a shorter interval [1-3
seconds] when capturing faster
moving objects.
Use a longer interval [5 seconds
or more] when capturing slower
moving objects
The
Number of Frames
represents how many photos will
be taken in the session.
Number of Frames Parameters:
10, 100, 300, 450, 900, 1800
Setting Start and End Points
3
2
1
Use the arrows to find a START
point and adjust the field of view
(degree of zoom).
Tap SET.
Use the arrows to select the END
point.
Tap SET.
Tap the icon to begin.
At this time, the Camera will
re-position to the starting point
and begin.
The Elapsed Time is the total time it takes to perform the motion time lapse. It is calculated by multiplying the
interval by number of frames, and is displayed in total minutes.
NOTE
The MTL can be cancelled at any time by tapping on the Stop Button. When stopping an MTL, you have the option
of saving the incomplete MTL into the SD card, or discarding all the photos taken during the session.
NOTE
USER MANUAL
19
SOLOSHOT.COM