EZL-200F User
’
s Manual Ver. 2.1
Sollae Systems Co., Ltd.
- 36 -
http://www.sollae.co.kr
5.4
UDP
UDP has no processes of connection. In this mode, data is sent in block units. Therefore,
data that comes through EZL-200F’s serial port must be classified in block units to send it
elsewhere.
5.4.1 Key parameters
Block Size (Unit: Bytes)
[Block Size] defines the size of a block in UDP mode. Its unit is byte. When the
amount of bytes is come into the serial port, EZL-200F sends them as one block to
the network. The maximum value could be 1,020 bytes.
Block Interval (Unit: 10miliseconds)
[Block Interval] means the time for gathering data to make one block. Its unit is 10ms.
EZL-200F waits data during [Block Interval] after the first data is received and sends
all gathered data as one packet. The first data means that the first received data from
the serial after the previous packet had been sent. The maximum value could be 3600.
(36 seconds)
Once one of the parameters is sufficient, the block size is decided as the condition.
