EZL-200F User
’
s Manual Ver. 2.1
Sollae Systems Co., Ltd.
- 31 -
http://www.sollae.co.kr
A situation that [Event Byte] is set to 5.
Fig 5-4 time chart for a situation that [Event Byte] is set to 5
Table 5-5 states of each point
Points
States
~
Receiving data from the serial port until the amount is 5 bytes
①
Sends connection request segment right after receiving 5 bytes.
~
Processes of the TCP connection
②
The connection has been established
~
The “1234567” is transmitted to the remote host
As you can see in the figure 5-5, EZL-200F sends request segment right after the serial
data had been 5 bytes. Even though those are come before the connection is established,
the data “123”, “45” and “67” are transmitted to the remote host because of the [Event Byte]
is set to 5.
