CIE-M10 User’s Manual Ver. 1.1
Sollae Systems Co., Ltd.
- 11 -
http://www. eztcp.com
Parameters
Supported Values
Baud rate
300 ~ 230,400 bps
Data bits
8, 7, 6, 5
Parity
None, Even, Odd, Mark, Space
Stop bit
1, 1.5, 2
Table 3-3 Supported Values of the Serial Port
TX Interval
When CIE-M10 sends data to its serial port, there are intervals between data. It is for
slow serial devices to give it enough time to process. The unit is byte.
Telnet COM Port Control Option
CIE-M10 has Telnet COM Port Control Option function that is specified by RFC2217. If
the Telnet COM Port Control Option is enabled, CIE-M10 sends the CTS control signal to
the communication counter part, and CIE-M10 sets its serial port items(RTS, Baud rate,
data bits, parity, stop bit) after getting information from the communication counter part.
For more information, please refer to our website. (
3.2.8
LED
There are 4 LEDs in the CIE-M10 as followed.
Mode
Name
Color
Status
Description
Common
PWR
Red
On
Power is on
Do0
Green
On
When Digital Output Port 0 is 1
Normal
Mode
STS_ACT
Yellow
Blink every 1
second
Static IP address or
An IP address is assigned.
Blink 4 times
every
IP address isn‟t assigned.
On
Modbus/TCP Connected
Blink
Transmitting data to LAN
LINK_ACT
Green
On
LAN link is established
Blink
Receiving data from LAN
Off
LAN link is not established
ISP Mode
STS_ACT
Yellow
Off
When CIE-M10 is in the ISP mode
in which upload firmware and web
pages
LINK_ACT
Green
On/Off
