77
76
▲
▲
CLEANING AND MAINTENANCE
– Before cleaning, moving and storing the appliance, please always switch the fan
off with the button
;
and disconnect the power plug from the power socket.
– The outer parts of the ventilator should be cleaned once a month with a slightly
moist towel. Take care to remove also the dust from the rear protection grid to
ensure unimpeded air circulation.
– Never submerge the appliance in water or another liquid and do not spray any
water or any other liquid into the appliance!
– Do not use any aggressive or chemical detergents resp. sharp or raw sponges and
the like. They might damage the surface of the fan.
– Store the appliance safe from dust in a dry and dark place.
– Retighten the rotor blade nut (
2
) and the rear nut (
4
) once a year to make sure
that the rotor blade is properly fastened.
▲
▲
TECHNICAL SPECIFICATIONS
Model no.
DE-EF16910, type 7582
Product description
Floor-standing fan with remote control
Voltage / Frequency
220–240 V~ / 50 Hz
Output
65 Watt
Dimensions
ca. 140 x 40 cm (H x Ø base)
Weight
ca. 8,6 kg
Technical changes reserved.
▲
▲
THE REMOTE CONTROL
Generally:
– The function buttons on the remote control correspond
to the function buttons on the control panel of the fan,
however, the button
can be used to choose the os-
cillation angle resp. the 360° rotation. This button can
only be found on the remote control. On the appliance
itself, the oscillation angle resp. the 360° rotation can
be selected by repeatedly pressing the button
.
– Open the battery compartment on the back of the re-
mote control and insert a CR2032 (3V) battery. Please
note the indicated polarity. Should you not use the
remote control for extended periods of time, please
remove the battery and store it separately. This increases
battery lifetime.
– The operating distance of the remote control is up to
3,5 meters. If you do not point the remote control
directly towards the receiver, meaning the display of the
fan, the operating distance is lower resp. the fan does
not respond to the remote control signals.
– Please make sure that there are no obstacles between
the remote control and the receiver.
– Please keep the remote control safe, it must not fall
down or break.
– Should the included battery run out of energy, insert a
new CR2032 battery.
