73
72
Direction buttons
The
centre of the selected oscillation angle
can be set with the buttons
.
As long as you press the buttons or , the fan head moves either to the left or
the right. As soon as you release the button, the fan oscillates within the selected
angle with the centre of the angle located where the direction button was released.
Note:
The centre of the oscillation angle can be set by hand
to an angle
between 0° and 360°.
The
vertical inclination can be set by hand
to the following angles:
-8°, 0°, 10°, 20°, 30°, 40°, 50°, 60°, 70°, 80°, 90°.
If the angle is set to 90°, the fan head is completely horizontal, the air circulates
upward without generating unpleasant, direct air draughts.
Horizontal orientation:
electric or manual setting
possible
Vertical orientation:
only manual setting
Oscillation button
Your fan can permanently swivel from the left to the right. At what angle this should
happen has to be previously set by you.
The automatic, horizontal oscillation can be set to the following angles with the
oscillation button
: 0 (no lines on the display, the oscillation stops) – 60° – 90° –
180° – 360° – 0 (oscillation stops). By each press of the
button, the setting jumps
to the next angle. The setting can be read off the display by the beam shaped lines.
8
Oscillation at a 60° angle
8
Oscillation at a 90° angle
8
Oscillation at a 180° angle
8
360° rotation
▲
▲
THE FUNCTION BUTTONS
ON YOUR APPLIANCE
Oscillation angle
+ timer (operation
time)
Oscillation
activated
Operation mode
Fan speed
8
;
ON / OFF button
▲
●
Once you connect the power plug to the power outlet, a double signal sound can
be heard, indicating that the appliance is in standby mode. In standby mode, the
appliance can only be activated with the ON / OFF button, all the other buttons are
deactivated. If you press the
;
button, the display lights up in the standard settings
and the fan starts up.
Speed button
You can select one of three speed settings by pressing the speed button: low, me-
dium and high. The high speed is followed by the low speed and then the sequence
starts over. The corresponding LED lights up in the display.
low
medium
high
