.13.
4. Installation
Figure 4.6 Wall Mount Bracket
4. Installation
.12.
Figure 4.5 Inverter Pillar Mounting
WARNING:
The inverter must be mounted vertically.
3. Use the suitable screws to fix the bracket to the wall.
5. Use screws to fix the bottom of the inverter to the mount bracket.
Figure 4.7 Fix the Inverter
The are two holes at the bottom of bracket, one to fix the inverter, another for the
lock.
The diameter of the lock should be less than 0.27in (7mm).
2.Ensure
the bracket
is horizontal
and the mounting holes
(in Figure 4.4 and Figure 4.5)
are m
arked
correct
ly
.
Drill
the
holes
i
nto
the
wall
or pillar at your
marks
.
4. Lift up the inverter (be careful to avoid body strain), and align the back bracket on the
inverter with the convex section of the mounting bracket. Hang the inverter on the
mounting bracket and ensure the inverter is secure (see Figure 4.6)
