Display backlight
If the device is powered by batteries, the display is not continuously lit. Touch the B1 button to light up the display for
approx. 15 seconds. In the case of power supply from the socket, the display will always be lit, but you can adjust the
intensity of the light by briefly touching button B2.
The device supports night mode, i.e. dimming the display backlight at night. To enter the settings, touch the B1 button
for approx. 2 seconds. Use the B2 button to switch between the settings. The setting sequence is as follows (when the
language is set to English):
NIGHT MODE -> BRIGHTNESS -> HR ENTRY TIME -> MIN ENTRY TIME -> HR EXIT TIME -> MIN EXIT TIME -> EXIT
When night mode is on, the icon will be displayed
. When the time for night mode to start is reached, the backlight
will automatically switch to the set brightness level. When the night mode ends, the brightness will be set to the
original value. In night mode, the brightness can be switched to the maximum level for 15 seconds using the B1 button.
Note: The
backlight is automatically switched off during the reception of the time control radio signal to avoid
unwanted interference.
Producer:
Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06
The product is covered by a Declaration of Conformity, which can be downloaded from
www.solight.cz
