•
When selecting a city, press and hold the
"
▲
" and "
▼
" buttons to quickly navigate to the desired city according to
the serial number in the table.
•
After selecting a city, press the
"
"
button to exit the selection mode and return to normal mode.
•
If your city is not in the table, you can press and hold
the "
" button for more
than 2 seconds to enter the custom
city setting mode. Before entering this setting you need to find out the time zone, longitude and latitude of your
city.
•
The sequence of setup items is as follows:
CITY CODE 1 -> CITY CODE 2 -> CITY CODE 3 -> TIME ZONE -> LONGITUDE -> LATITUDE -> END
•
When you have finished selecting a city, the sunrise and sunset time is automatically calculated according to the
location, time zone and current time of the selected city and displayed in the corresponding area.
Temperature and humidity detection
Internal temperature measurement range: -
9.9 °C (+14°F) ~ +50 °C (+122°F),
LL.L
°C(°F) is displayed if the value is lower
than -
9.9 °C (+14°F),
HH.H
°C(°F) is displayed if the value is higher than +50 °C (+122°F).
Outdoor temperature measurement range: 40°C (
-
40°F) ~ +70°C (+158°F),
LL.L
°C(°F) is displayed if the value is below
-
40°C,
HH.H
°C(°F) is displayed if the value is above +70°C.
Indoor and outdoor humidity measurement range: 20%RH~95%RH,
19%RH
will be displayed if the value is lower than
20%RH,
96%RH
will be displayed if the value is higher than 95%RH.
Display data
The display can show maximum/minimum temperatures and relative humidity. Switch between the values with short
presses of the down arrow. To reset all values, press and hold the down arrow for approx. 2 seconds.
Setting the outdoor temperature alert
Press and hold the B7 button for about 2 seconds to enter the temperature alarm settings. The sequence of setting
items is as follows: UPPER LIMIT -> LOWER LIMIT -> END. The limits can be set separately for each channel using button
B6.
You need to turn on the alerts separately for each channel. So, first switch to the desired channel by briefly pressing
the B6 button and then turn on the alert using the B7 button. If the temperature exceeds the set range, the weather
station will emit three beeps. The temperature alarm icon and either the upper
or lower limit symbol will flash
simultaneously
. Press any button to turn off the audible alarm. However, the symbol will remain displayed.
Another feature is the frost warning. If the temperature of the outdoor sensor is between -
1 °C and +3 °C, the icon
flashes
.
Symbols of comfort and mold risk
The indoor comfort level is calculated according to the indoor temperature and humidity and has a total of five levels.
Comfortable
too cold or too hot
The risk level of mold is displayed in four levels: HI (high), ME (medium), LO (low), no icon (zero).
Low battery indication
If the battery icon is displayed
in the INDOOR segment, the batteries in the weather station need to be replaced.
If the icon is displayed in the OUTDOOR segment, the battery in the wireless sensor on that channel needs to be
replaced.