Automation made simple.
l
www.solidmation.com
Connection diagram “A”
Electrical Installation:
Electrical installation shall be done by an authorized
electrical technician or a qualified professional.
Push-button
Power Supply
6-24 VDC
+
LED RGB
Specifications
HPA-2160
allows controlling common anode RGB
LEDs with a single channel.
HPA-2160 complies with electromagnetic emission
standards, thus ensuring no interference with
other devices. The operation of this equipment is
not affected by the interference of other equipment
complying with the electromagnetic emission
standards.
LED controller
HPA-2160: RGB LED controller
Dimmable switch for LED RGB.
Installation manual
The LED Controller equipment from the Home
Automation series is designed to be installed
in any position, over roofs or suitable cabinets
according to their size.
Electrical connection diagram “A” shows an
example of an installation.
In case of failure or defects, please contact
authorized technical support
Technical characteristics
l
Voltage: 6-24 VDC
l
Quantity of independent channels: 3
l
Maximum section of cables for installation: 1.5 mm
2
l
Type of Load: LEDs RGB
l
Maximum torque for terminals (screw clamps): 0.5 Nm
Solidma
tion-MA-HP
A-2160_V3-Ins
talla
tion_Manual-00-EN
