l
• www.solidmation.com | [email protected]
Power Supply
6-24 VDC
+
l
www.solidmation.com |
l
www.solidmation.com | [email protected]
1.
Turn off power and dismantle the box where the
push-button will be installed.
2.
Dismantle the box containing the push-button
controlling the RGB LED.
Wiring:
3.
Connect the RGB LED power supply to the “+” and
“-” terminals of the module.
4.
Connect the push-button to the input channel: “C”
and “1” terminals.
5.
Connect the LEDs to the output channels “R”
(Red), “G” (Green), “B” (Blue) and “+” that
corresponds to the common anode of the RGB
LEDs
6.
Check that connections are done according to
Diagram “A”.
7.
Mount the switch frame and cover.
8.
Run the Habeetat Planner software and follow the
instructions for proper configuration of your device.
Procedure for proper installation
Congratulations, your equipment is now ready to be
configured using Habeetat Planner software.
Solidmation S.A. | All rights reserved. Subject to changes without prior notice.
