manualshive.com logo in svg

Solid State Logic ORIGIN, Installation Manual, Page: 8 / 37

Share
Download
Solid State Logic ORIGIN Installation Manual Download Page 8

ORIGIN Installation Guide

Safety And Regulations

3

Physical Safety

The console surface is too heavy for one person to move; ensure sufficient manpower is available when positioning 
the console and any associated IO or peripheral equipment.
 
If the console trim is removed for any reason then there may be sharp edges exposed on the frame metalwork.

Environmental

Evaluation of apparatus based on altitude not exceeding 2000m. There may be some potential safety hazard if the 
apparatus is operated at altitude exceeding 2000m.
 

Evaluation of apparatus based on temperate climate conditions only. There may be some potential safety hazard 
if the apparatus is operated in tropical climate conditions.

Tools

Origin is supplied with a pair of T-handle Module Pullers (SSL Part #53911152A) and a 2mm Allen Key to aide with maintenance of the channel 
strips. Other tools that may be needed for installation are an 8mm Metric (M8) spanner/socket or adjustable spanner to attach the legs. 
If there is a need to remove the end trim of the console, a #2 Pozidriv screwdriver will be needed for the front buffer/armrest to end 
trim screws.

Summary of Contents for ORIGIN






































Reviews:

No comments