Solid State Logic Duality Operator'S Manual Download

Page: 65 / 127

Motion Control

Selection Mode (Zoom/Sel button flashing)

In this mode the cursor buttons provide a way to create and edit selections within the DAW program.

To create a selection, press and hold either the left or right cursor button and move the inner shuttle wheel to

adjust the start or end point for the selection. The up and down cursor buttons will move the selection to the next

track. Holding

SHIFT

and using the up/down buttons will allow the selection to be extended across multiple

tracks.

Holding the left

and

right cursor buttons simultaneously, while scrubbing, retains the selection duration while

moving the selection start point.

Pressing

Up/Down

cursor button removes the upper or lowermost track from the selection.

Please note that HUI Selection Mode is no longer supported in Pro Tools HD software version 7.2 and above

Scrolling Within a Window

To page scroll one page in either direction within a currently selected window (ie. Mix/Mixer or Edit/Arrange),

press the

ALT

Left/Right/Up/Down

cursor button.

Holding down

OPTION

and

ALT

scrolls to the window boundary.

Shuttle/Scrub Wheel (17)

A dual-concentric Shuttle/Scrub wheel is provided. It has a spring-loaded outer ring and a continuously variable

inner wheel for DAW scrub and shuttle functions. The wheel can also be used to make and adjust selections on

the DAW.

Shuttle Mode

With the DAW stopped, turn the wheel to activate shuttle mode. The outer rim will step through seven fixed

shuttle speeds, while the inner controller is continuously variable.

To use the inner wheel as a shuttle control, press the

SHUTTLE

button above the wheel. The inner wheel now

becomes a continuously variable shuttle control.

Scrub Mode

Select a region to scrub within the DAW. Press the

SCRUB

button above the wheel. The inner wheel now

becomes an analogue tape machine style scrub wheel.

Using the Numeric Keypad to shuttle

Depending upon the configuration of your DAW system, the numeric keypad can be used to control shuttle

speed and direction. Hold down the

CTRL

button followed by a number on the numeric keypad that represents

the shuttle speed. The +/- buttons control the direction of shuttle.

To exit from shuttle mode press either the

STOP

ESC

button.

Duality Operator’s Manual

3 - 1 5

Summary of Contents for Duality
































































































































Search results

Summary of Contents for Duality

Reviews:

Related manuals for Duality

Brands by name

Popular brands

Solid State Logic Duality, Operator'S Manual

Search results

Summary of Contents for Duality

Reviews:

Related manuals for Duality

Brands by name

Popular brands