Solid State Logic Duality Fuse Installation And Setup Manual Download Page 38 | Manualshive

Page: 38 / 70

background image

Page 34

Duality

F

use Installation & Setup Guide

Setting Up Your DAW

Section 5

Installing the ipMIDI Driver and Logictivity Browser

Before you can use an Ethernet connection (either directly or via a network) a third party ipMIDI software driver must
be installed onto the DAW computer.

Download on to your workstation computer either the DualityDelta_Mac_Support.dmg disk image (Macintosh) or the
DualityDelta_Win_Support.zip

file (Windows). These contain the Duality Remote and ipMIDI applications and the latest

version of the installation instructions:

System requirements for your workstation computer:

• Duality Remote is a Java application. It will run under Java Version 5 or higher.

• ipMIDI is compatible with Windows 2000 (max 9 MIDI ports), XP, Vista , 7 and Macintosh OSX 10.4 and above.

ipMIDI Software Installation (For Macintosh)

Mount the DualityDelta_Mac_Support.dmg disk image and open it.

Duality Remote

—

Drag the enclosed Duality Remote application to the Applications folder, then to the Dock or any

other convenient location.

ipMIDI

—

Double click on the ipMIDI.pkg file to run the installation

program. Note that you will be asked to log out and in again once you
have completed the installation. Once you have logged back in open
Audio MIDI Setup and double click on the ipMIDI icon. Set the number
of MIDI ports to 16 in the resulting pop-up.

If you are upgrading an older copy of ipMIDI you must uninstall it before
running the installer. To uninstall ipMIDI simply delete: </Library/Audio/MIDI
Drivers/ipMIDIDriver.bundle>. You should empty the Trash after deleting the
bundle file before running the installer.

ipMIDI Software Installation (For PC)

Open the DualityDelta_Win_Support.zip archive.

Duality Remote

— Copy the DualityRemote.exe file to the Program Files folder (or any

other convenient location) then create a shortcut to it on your desktop and/or task bar.
Double clicking on this will launch the Duality Remote program.

ipMIDI

— Run the setupipmidi_1.6.exe application (note that the last part of the name

may change depending on the version you are installing) by double clicking on it. Note
that you will have to restart the computer at the end of the setup process. Once the
computer has restarted right click on the ipMIDI icon in the task bar and set the number
of MIDI ports to 16 in the resulting pop-up.

If you are upgrading an older copy of ipMIDI you must uninstall it (using Add/Remove programs)
before running the installer.

«
...
36
37
38
39
40
...
»

Summary of Contents for Duality Fuse







































































Reviews:

No comments

Related manuals for Duality Fuse

Brand: Rane Pages: 8

Brand: Rane Pages: 4

Brand: M-Audio Pages: 15

Brand: Way Huge Pages: 3

Brand: DAPAudio Pages: 16

Brand: Denver Pages: 6

Brand: RNIB Pages: 9

Brand: IMG STAGELINE Pages: 18

VINTAGE DISTORTION VD1

Brand: Behringer Pages: 2

Brand: Grunkel Pages: 14

Brand: Rolls Pages: 1

Brand: G-Lab Pages: 8

TRAPPER BASS DISTORTION

Brand: Fender Pages: 8

Let's Bake 31575

Brand: Lakeland Pages: 28

Brand: Pyle Pro Pages: 33

Eclectrics 63220

Brand: Hamilton Beach Pages: 70

Brand: Viscount Pages: 40

Brand: KitchenAid Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands