Solid State Logic Alpha Channel, Installation Manual

Page: 9 / 52

5
EN
DE
FR
ES
IT
Insert Selection
IN
Routes signal out of the Insert Send to be
returned through the Insert Return (pre- EQ)
POST EQ
Places the Insert Send and Return after the EQ
SUM
Mixes the Send signal with the Return signal
EQ IN
3-Band EQ
Low Frequency: Switchable ‘shelving’ or ‘bell’ curves
Mid Frequency: Parametric with adjustable frequency and ‘Q’
High Frequency: Fixed ‘shelving’ curve
LF Bell
Select between a ‘shelving’ or a ‘bell’ curve:
‘
Shelving’
‘
Bell’
Output Gain
Provides ±20dB of adjustment
Output Meter
Measures level before the ADC,
‘0’ indicates 0dB FS
Lite Limit
Provides a non-intrusive signal limiter ahead of the
ADC. When switched in, the pre- Insert Send level will
drop by 12dB to enable headroom to be retained under
limiting conditions. The switch will glow ‘green’ whilst
the limiter is in-active, and change progressively
through ‘orange’ to ‘red’ as more limiting is applied.
ADC Lock
Indicates that a valid SPDIF signal is present on the SPDIF IN socket
on the rear of the unit and that the ADC is locked to this signal