Solid State Logic Alpha Channel, Installation Manual

Page: 7 / 52

3
EN
DE
FR
ES
IT
2. Connect
INSERT
MANUFACTURED IN U.K.
LINK
IN OUT
SPDIF
ANALOGUE
OUT SEND RETURN
~ 50/60Hz
100 - 240VAC
0.4 - 0.2A
POWER
RISK OF ELECTRIC SHOCK
This equipment must be earthed. Refer to manual for installation instructions.
CAUTION! Disconnect all power sources before removing any panel(s).
No user-serviceable parts inside - to be serviced only by qualified personnel.
WARNING! Unearthed parts may be present inside enclosure.
Check for hazardous voltages before touching.
Do not expose to rain or moisture
DO NOT OPEN
CAUTION Solid State Logic - Oxford - England
ALPHA Channel
Part no. 629999XA
Serial No
12345
Lite Limit Link ( daisy-chain to other Alpha Channel units )
Linked units have the same degree of ‘limiting’; useful for stereo signals
AC Line Power
100 – 240Vac ~50/60Hz
SPDIF In
Alpha Channel’s SPDIF Out will run at 44.1kHz unless
an external SPDIF Sync is provided (32kHz ~ 108kHz).
SPDIF Out
Left stream: Main Analogue Output (0dB FS = +24dBu)
Right stream: Pre- Insert Send signal
Analogue Output
Balanced, max. output: +24dBu = 0dB FS
Insert Send/Return*
Balanced, level relative to output: 0dB (Lite Limit out)
+12dB (Lite Limit in)
* Only active whilst the Insert is switched ‘IN’
Connections (Rear Panel)
Phono ¼" Stereo Jack
Tip Signal +ve
Ring n/a –ve
Sleeve 0V 0V
Connections (Front Panel – see overleaf)
Microphone 3-pin XLR-F Instrument ¼" Mono Jack
Pin 1 0V Tip Signal
Pin 2 +ve Sleeve 0V
Pin 3 –ve