PRODUCT MANUAL
NeonMax 24V 85W
Toll Free. 425-582-7533
www.SolidApollo.com
page 5
™
Technical Information
1. Do
- Check the length of the positive and negative wires before soldering to avoid having to cut and re-solder the cables.
Remember, if the cables are not a proper length the connection will not be waterproof sealed.
2. Don’t
- Do not forget to slide the Cable End Cap onto the cable wire first before soldering your connections (refer to Step 4).
Do’s and Don’ts
Before Soldering Cable Wires to NeonMax
Proper Handling and Cutting
1. Do -
Always double-check the cut point you are preparing to cut. Highlight it with a marker if you have to, it’s better
to be safe than sorry.
2. Don’t -
Keep in mind that the NeonMax is side bending (left to right) in the opposite direction of the light output
and not top bending (up and down). Bending the NeonMax vertically could split the contacts causing the unit to fail.
If you do have to adjust the NeonMax vertically, off the brackets for example, pull the unit off the brackets gently.
Dimmable :
Minimum Cut :
Available Colors :
Total LEDs :
LEDs per Foot :
Operating Voltage :
Watts per Foot :
Candle Light Warm White 2400K
Super Warm White 2700K
Warm White 3000K
Daylight White 4000K
Natural White 5000K
Red, Green, Blue, & Amber
Yes
2in (50mm)
720
37
24V
4.3W
Watts per Spool :
Max Power :
LED Type :
Beam Angle :
Warranty :
Weight :
Size :
IP Rating :
Working Temperature :
85W
85W
SMD 2835
113º
3 Years
3.6lb
L: 19.7ft x W: 0.4in x H: 0.72in
IP67
-10F to 140F
