5
IMPORTANT SAFETY INSTRUCTIONS (Continued)
ACCIDENT PREVENTION
To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner, follow basic precautions,
including the following:
Be sure the electrical service is adequate for the model you have chosen. This information can be found on the
rating label located on the side of the cabinet or behind the grille.
If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass prior to
installation. If the windows is a triple-track type with a screen panel included, remove the screen completely before
installation.
Be sure the air conditioner has been securely and correctly installed according to the installation instructions
provided with this manual. Save this manual and the installation instructions for future use when removing and
reinstalling the unit.
When handling the air conditioner, be careful to avoid cuts form sharp metal fins on the front and rear coils.
ELECTRICAL INFORMATION
The complete electrical rating of your new air conditioner is stated on the product rating label located on the unit. Refer
to the ratings on the label when checking electrical requirements.
Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is important.
The power cord is equipped with a three-prong grounded plug for protection against shock hazards.
Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is
not adequately grounded or protected by a time delay fuse or circuit breaker, a qualified electrician will have to install
the proper receptacle.
Do not run the air conditioner with a protective cover on the outside of the unit. This could result in mechanical dam-
age within the air conditioner.
Do not use an extension cord or an adapter plug.
NOTE:
The power supply cord on this unit contains a current detection device designed to reduce the risk of fire.
Please refer to the page “LCDI POWER CORD AND PLUG” for details. In the event that the power supply cord is
damaged, it cannot be repaired, it must be replaced with a cord from Soleus Home Comfort.
Read all instructions before using this air conditioner
Power supply cord with 3-prong grounding
plug and current detection device
WARNING:
Avoid fire hazard or electronic shock,
DO NOT use an extension cord or an adapter plug.
DO NOT remove any prong from the power cord.
DO NOT
under any circumstances,
cut, remove, or bypass the
grounding prong!!
