Note: Make sure power is off and the power cord is not plugged into an elec-
trical outlet prior to performing any maintenance on the unit.
Clean or Replace Filter
-
The Clean Filter indicator will illuminate every 250 hours of operation as a
reminder to clean the filter. A clean filter will keep the unit operating at optimum performance. Remove the
filter from the back of the unit by using your thumbs to press down on the filter tabs directly above the filter.
Clean the filter with warm, soapy water. Dry thoroughly before replacing the filter. Once the filter is complete-
ly dry, place the filter back in the unit and press the FILTER button to reset the filter indicator.
CAUTION: DO NOT OPERATE THE DEHUMIDIFIER WITHOUT THE INCLUDED FILTER
Clean the Unit Housing
-
1) Keep the unit from being exposed directly to the sun to prevent color
fading.
2) Clean the surface with a damp cloth and dry it with a soft towel.
MAINTENANCE
End of Season Storage / Transporting the Unit
1) Turn off the dehumidifier
2)
Unplug the unit and secure the power cord to the back of the unit
3)
Clean or replace filter
-
Refer to Operating Instructions Clean Filter section
4)
Empty any water remaining in the bucket and rinse bucket with a mild detergent
5)
Insert the empty water bucket back into the dehumidifier
6)
Your dehumidifier is now ready for storage or transportation
7)
The unit should be stored in a cool dry place
NOTE:
While in Pump Mode, if the unit is turned off, the pump will remove all remaining water from
internal tank prior to the unit completely powering down. The pump indicator light will stay on during this
period. Do not unplug the power cord until pump indicator light is off.
