37
7.4 Choosing Safety Regulation After Starting Up
1)
Attentions before the operation
Only perform this operation when the voltage value displayed on Soleos
inverter’s LCD
falls between 150V and 450V for 1.5kW/2.0kW inverters or between 150V and 550V for
3.0kW/4.0kW/5.0kW inverters.
Only perform this operation when the accumulative generated electricity is less than 1KWh.
2)
Operation steps are as following
a. Power on the inverter with only DC side connected, while disconnecting cables of AC
side.
b.
Press the Function button until the LCD displays inverter’s model and hold the button for
5 seconds or more when the LCD displays the current Safety Standard. Change the
standard by pressing the Function button one at a time.
Function button
