Red LED blinking 4 times :
either short-circuit or overconsumption on one station
or the product has been turned off and on 2 times in a short time period, while a
station was working.
Red LED blinking 5 times :
you are over the time required to install the controller.
Start the initialization again.
LED off :
the product is not powered.
GENERAL INFORMATION
PLEASE READ THE FOLLOWING SECURITY INSTRUCTIONS CAREFULLY
BEFORE SET UP OR USE THE SMART-IS. PLEASE RESPECT THESE
PRECAUTIONARY MEASURES.
The
SMART-IS
has to be installed indoor or in a sheltered place.
Place your product in order to have the power outlet not far from the equipment.
The socket is a sectioning device that has to be accessible all the time. Be sure that
the power transformer has a protection against overintensifies and short-cuts, type
16A. Only use the power pack provided with the product :
INPUT: 230V ~ 50Hz OUTPUT: 24V ~ 0.75A
The symbol “CE” indicates that this device complies with the European
standards on safety, health, the environment and the protection of the user.
Devices with the symbol “CE” are intended for sale in Europe.
This symbol indicates that these types of electrical and electronic devices
must be discarded separately in European countries. Do not dispose of this
device with your household waste. Please use the collection and recycling
points available in your country when you no longer need this device.
~
This symbol indicates that the power supply is an alternative power.
This symbol indicates that the supply voltage is an alternative voltage.
This symbol indicates that the power pack has a double isolation class 2
type.
