INSTALLATION GUIDE
KM SERIES MICROWAVE LINK
58
Rev 1.1
KM Series DT radio showing Low Band Diplexer installation
7.1.5
KM Series ST First Release* Component Replacement
1.
Follow common steps for removing the Common Cover (
Figure 7-1)
and
removing the Polarizer (
Figure 7-2
).
2.
When installed, a rectangular polarizer may be rotated for different
polarization as described in Section
7.1.1.3
.
3.
Using an appropriate Allen key size, remove the 4 (6-32) socket-head
screws attaching the transition to the diplexer. (Refer to
Table 7-1
for screw
sizes).
4.
Replace the diplexer as per Section
7.1.3
.
5.
Ensure keeping all fasteners in a safe place for future use.
Transition (frequency specific)
Customer replaceable
diplexer (band specific)
Common cover removed
Tx
Rx
Polarizer (frequency specific)
