SOLE 16608600950, Owner'S Manual

Page: 33 / 43

33
Dyaco Canada Inc. 2016 customerservice@dyaco.ca
Engineering Mode display page
When the STOP key is pressed, the screen appeared to exit the prompt string "EXIT FACTORY MODE AND
RETURN TO THE HOME PAGE". Press YES, then back to main workout home page. Press NO you back to the
Maintenance menu page, the screen shown below:
Incline Calibration: If there is a problem with the incline, try running the calibration. Press the
Incline up key and the Start key at the same time. Hold them down for 5 seconds and press Start
key to begin Incline calibration will start and run automatically. Exit the calibration page you need
to power off then power on. If the problem persists contact service department.