9
Installation
LP Tank Requirements
The LP gas cylinder must be constructed and marked in accordance with the specifications for
LP gas cylinders of the U.S. Department of Transportation (DOT) and designed for use with a
QCC-1 quick disconnect system only.
The cylinder must be provided with a shut-off valve terminating in an L.P. gas supply cylinder
valve outlet specified, as applicable, for connection No. QCC-1.
The cylinder must be provided with a listed overfilling prevention device.
The pressure regulator and hose assembly supplied with the outdoor cooking gas appliance
must be used. Replacement of pressure regulators and hose assemblies can be purchased
from authorized dealers.
The cylinder supply system must be arranged for vapor withdrawal. Make sure the LP cylinder
has a collar to protect the cylinder valve.
(a) Do not store a spare LP gas cylinder under on near your grill.
(b) Never fill the cylinder beyond 80 percent full.
(c) If the information in (a) and (b) are not strictly followed, a death-causing fire or serious
injury may occur.
Dented, rusty or damaged propane cylinders must be replaced immediately.
NEVER USE A RUSTY OR DAMAGED TANK
WARNING!
