10
SHELVES
To prevent damaging the door gasket, make sure to have
the door all the way open when pulling the shelves out of
the rail compartment.
For easy access to the stored content, you can pull the
shelf approximately halfway out of the rail compartment.
However, this unit was designed with a plastic post on
each side of the shelf track to prevent shelf contents from
falling.
When removing the shelf from the inner rails, move to the position where the notches in the shelf are
exactly aligned with plastic posts and lift the shelf. In order to replace the shelf, repeat this procedure
in reverse.
CLEANING YOUR APPLIANCE
Turn off the power, unplug the appliance, and remove all items, including shelves.
Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of
baking soda to a quart of water).
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth when cleaning the area where the controls are
located, or any electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
Use an approved stainless steel cleaner to clean the door and handle. Do not use steel wool or a
steel brush on the stainless steel.
Failure to unplug the appliance during cleaning could result in electrical shock or other personal
injury.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your
appliance if you minimize the number of times the door is opened. If the power is going to be off for a
longer period of time, you need to take the proper steps to protect the contents.
VACATION TIME
Short vacations: Leave the appliance operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all items and turn off the
appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door
open slightly.