Dyaco Canada Inc. 2014 [email protected]
11
3
STEP
HARDWARE
STEP 3
1.
Secure
the
Seat (19)
to
the sliding seat carriage by using
the
Combination M5 Allen Wrench & Phillips Head Screw Driver (68)
to tighten 4pcs of M6 × 35L Phillips Head Screws (55).
2.
Install
the
Seat Handle Bar (7) on the sliding seat carriage by using
the
L Allen Wrench (92) to
tighten
4pcs of 3/8" × 1-3/4" Button
Head Socket Bolts (61), going through
the
Seat Handle Bar (7)
and 4pcs of 3/8" × 19 × 1.5T Flat Washers (62), then use
the
14.15m/m Wrench (69) to tighten 4pcs of 3/8" × 7T Nyloc Nuts
(63).
3.
Install
the
Backrest Bracket
(53) on the Seat Handle Bar(7) by
using
the
L Allen Wrench (92) to
tighten
2pcs of 3/8" × 3/4" Button
Head Socket Bolts (60), going through
the
Seat Handle Bar (7)
and 2pcs of 3/8" × 19 × 1.5T Flat Washers (62), then use
the
14.15m/m Wrench (69) to tighten 2pcs of 3/8" × 7T Nyloc Nuts
(63).
4.
Install
the Backrest
(52) on the
Backrest Bracket
(53) by using
the
Combination M5 Allen Wrench & Phillips Head Screw Driver (68)
to tighten four 1/4" × 1"_Phillips Head Screws (59) and four 1/4" ×
13 × 1T_Flat Washers (58), then cover the
Backrest Bracket
(53)
with
the Backrest Cover
(54).
5.
Connect
the
Lower and Middle handpulse wires (95, 108).
#55.
M6 × 35L_Phillips
Head Screw (4 pcs)
#61.
3/8" × 1-3/4"_
Button Head Socket
Bolt (4 pcs)
#62.
3/8" × 19 × 1.5T_
Flat Washer (6 pcs)
#63.
3/8" × 7T_
Nyloc Nut (6 pcs)
#60.
3/8" × 3/4"_
Button Head Socket
Bolt (2 pcs)
#58.
1/4" × 13 × 1T_
Flat Washer (4 pcs)
#59.
1/4" × 1"_
Phillips Head Screw
(4 pcs)
