Customer Service 1-888-707-1880 Dyaco Canada Inc. 2014
email: [email protected]
6
IMPORTANT
OPERATION INSTRUCTIONS
NEVER
operate this treadmill without reading and completely understanding the
results of any operational change you request from the computer.
Understand that changes in speed and incline do not occur immediately. Set your
desired speed on the computer console and release the adjustment key. The
computer will obey the command gradually.
NEVER
use your treadmill during an electrical storm. Surges may occur in your
household power supply that could damage treadmill components. Unplug the
treadmill during an electrical storm as a precaution.
Use caution while participating in other activities while walking on your treadmill;
such as watching television, reading, etc. These distractions may cause you to lose
balance or stray from walking in the center of the belt; which may result in serious
injury.
NEVER
mount or dismount the treadmill while the belt is moving. Treadmills start at
a very low speed and it is unnecessary to straddle the belt during start up. Simply
standing on the belt during slow acceleration is proper after you have learned to
operate the unit.
Always hold on to a handrail or hand bar while making control changes (incline,
speed, etc.).
Do not use excessive pressure on console control keys. They are precision set to
function properly with little finger pressure. Pushing harder is not going to make the
unit go faster or slower. If you feel the buttons are not functioning properly with
normal pressure contact your dealer.
SAFETY
TETHER CORD
A safety tether cord is provided with this unit. (
See Step 6 of Assembly Guide,
#63)
It is
a simple magnetic design that should be used at all times. It is for your safety should
you fall or move too far back on the tread-belt. Pulling this safety tether cord will stop
tread-belt movement.
To Use:
1. Place the magnet into position on the red portion of the console control head. Your
tread- mill will not start and operate without this. Removing the magnet also
secures the tread- mill from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power.
Note: The magnet has strong enough power to minimize accidental,
unexpected stop- ping.
The clip should be attached securely to make certain it
does not come off. Be fa- miliar with its function and limitations. The treadmill will
stop, depending on speed, with a one to two step coast anytime the magnet is
pulled off the console. Use the red Stop / Pause switch in normal operation.
