Customer Service 1-888-707-1880 Dyaco Canada Inc. 2014
email: [email protected]
20
CUSTOM PROGRAM
1. Select
Custom
on the
Program
keypad, then press
Enter
. Note that the dot
matrix display portion will light a single row of dots at the bottom (Unless there is a
previously saved program). If there is a program stored under the button that is
pressed, it will be retrieved. If not, you have the option of programming in your first
name. The
Message
window will display and flash the letter ”A” . To change it,
press the arrow ke
y, then “B” will be displayed; if the arrow
key is pressed,
the letter “Z” will be displayed. After selecting the appropriate letter, press
Enter
.
The letter “A” will again be displayed and blinking. Repeat the procedure until all
letters of your first name are programmed (7 characters maximum). When your
name is displayed, press
Stop
and it will be stored under
Custom
.
2. The
Message
window will now show an
Age
value. Adjust the age with the
Up
/
Down
keys and press
Enter
.
3. The
Message
window will show a bodyweight value. Adjust the number with the
Up
/
Down
keys to your bodyweight value and press
Enter
.
4. The
Time
window will be flashing. Use the
Up
/
Down
adjustment keys to set the
program for the desired time. Press the
Enter
key. This is a must to continue even
if the time is not adjusted.
5. 5. The first speed setting column (segment) will now be blinking. Using the
Fast
/
Slow
keys, adjust the speed to your desired effort level for the first segment
then press
Enter
. The second column will now be blinking. Note that the previous
segment value has been carried over to the new segment. Repeat the above
process until all speed segments have been programmed.
Note:
While in a User program, if you manually change the speed, all segment speeds from
there on will also change.
Examples:
If you increase your current speed 1 mph, the remaining segment speeds will increase
by 1 mph. If you decrease your current speed .5 mph, the remaining segment speeds will
decrease by .5 mph, etc.
6. The first column will be blinking again. The console is now ready for the incline
settings. Repeat the same process used to set the speed values for programming
the segments for incline.
7. Press the
Start
button to begin the workout and also save the program to
memory.
