Solé, S.A. C-243 b, km 2 · 08760 Martorell (Barcelona) ·Tel. +34 93 775 14 00 · www.solediesel.com · [email protected]
8
Marine Diesel gensets. Operator’s Manual.
Safety, precautions and
instructions
Engine labels
If the engine does not start after several attempts to crank may
cause water entering the engine. In this situation it is
recommended:
1)
Close the seacock.
2)
Drain the water from the exhaust system in the water
trap.
3)
Do not try to restart the engine until the cause of the
start fail is identified.
The engine and the gearbox are supplied without any fluid inside. Consult the
manual to follow the installation procedure and commissioning as well as the
fluid capacity - coolant, oil and oil of gearbox
Moving parts. Keep hands, feet, hair, clothing and test leads away from the belts
and pulleys when the engine is running. Replace guards, screens and covers before
operating the engine.
Read the engine operator's manual and understand it before any
operation and maintenance of the engine, to ensure that it continues
operating practices and maintenance procedures insurance.
Dangerous voltage. Operate the engine only when all guards and
electrical panels are ready.
Hot parts, coolant and steam. Stop the engine and let it cool down
before touching or removing any engine part.
Moving parts. Keep hands, feet, hair, clothing and test leads away
from the belts and pulleys when the engine is running. Replace
guards, screens and covers before operating the engine.
Heavy material. Engine is a heavy element, use the right tools for
transportation and handling.
Do not use the motor as a step. Use it as a step can cause engine
damage plus cause undesired operation.
Connection point of the battery cables to the engine. Red cable (positive) and
black cable (negative).
system.
Engine exhaust line installation label, above and below the waterline. See
5.7.
Intake and exhaust
