Solé, S.A. C-243 b, km 2 · 08760 Martorell (Barcelona) ·Tel. +34 93 775 14 00 · www.solediesel.com · [email protected]
36
Marine Diesel gensets. Operator’s Manual.
Systems and scheduled
maintenance
Maintenance task. Exhaust gas, noise and vibrations inspection
Inspect the exhaust system components for cranks, leaks and corrosion.
Exhaust system inspection points
1.
Check the hoses for softness, cranks or dents. Replace the hoses as needed.
2.
Check for corroded or broken metal parts and replace them as needed.
3.
Check for loose, corroded or missing clamps. Tighten or replace the hose clamps and/or
hangers as needed.
4.
Check that the exhaust outlet is unobstructed.
5.
Visually inspect the exhaust system for exhaust leaks. Check for carbon or soot residue on
exhaust components. Carbon and soot residue indicate an exhaust leak. Seal leaks as
needed.
5.8.
Electrical System
Panel
You can find
all information in the control panel operator’s manual.
Sensors and switches
Coolant temperature sensor:
-
Operating voltage: 6-24V
-
Operating current: <85mA, Pmax<0.25W
-
Operating temperature: -40°C to +120°C
-
Measuring range: -40°C to +120°C
-
Absolute max. value: 130°C, max. 1 min.
-
Protection: BODY IP 67
-
Tightening torque: Max. 20Nm
Oil pressure sensor:
-
Operating voltage: 6-24V
-
Operating current: >20mA, <85mA, Pmax<0.25W
-
Operating temperature: -20°C to +100°C
-
Measuring range: 0
–
10 BAR
-
Absolute max. value: 30 BAR, max. 2 seconds.
-
Protection: BODY IP 67
-
Tightening torque: Max. 20Nm
Function table
Temperature
(ºC)
Resistance
(ohm)
Tolerance
(ohm)
40
287.4
±32.8
60*
134
±13.5
80
69.1
±6.5
90*
51.2
±4.3
100*
38.5
±3.0
120
22.7
±2.2
*Test point
Function table
Pressure
(BAR)
Resistance
(ohm)
Tolerance
(ohm)
0
10
+3/-5
2
52
±4
4
88
±4
6
124
±5
8
155
±5
10
184
+20/-10
